Why the 16FT Coil Hose Deserves a Place in Your Camp Kitchen
The WaterPORT 16FT Coil Hose extends your reach by 16 feet, making it easier to use your WaterPORT for cooking, showering, or filling water bottles without moving the tank. It's made from TPV-approved material and is safe for potable water, so you can drink from it without worry.
This guide walks you through setting up the hose, storing it properly, and fixing common leaks so you get reliable performance trip after trip.
Key Features of the 16FT Coil Hose
- 16FT Coil Hose: 16-foot TPV approved hose, perfect for potable water use. The length gives you flexibility around camp, and the potable-water approval means you can use it for drinking and cooking.

16FT Coil Hose - 16FT Coil Hose: Includes quick connect adapters to work with older systems too. These adapters ensure compatibility with a range of WaterPORT setups, so you can upgrade your hose without replacing your entire system.
How to Set Up Your WaterPORT 16FT Coil Hose
Follow these steps to connect your hose and start using it at camp.
- Attach the quick connect adapters: If your WaterPORT system uses an older connection, screw on the included quick connect adapters to the hose ends. Hand-tighten only; no tools are needed.
- Connect to your WaterPORT: Snap the quick connect fitting onto your WaterPORT outlet until it clicks. Tug gently to confirm it's secure.
- Connect the other end: Attach the nozzle or spigot you plan to use to the other end of the hose. Again, ensure a snug fit.
- Test for leaks: Turn on the water flow and check each connection for drips. A slight twist can often stop a minor leak. If leaks persist, see the leak-fix section below.
- Extend the hose: Uncoil only as much hose as you need to reach your task. Avoid stretching it across sharp edges or high-traffic areas.
Tips for Using the Coil Hose at Camp
The coil design keeps the hose compact and tangle-free, but a little care goes a long way. When using the hose for cooking or filling bottles, keep the end elevated to prevent it from touching the ground. After use, shake out excess water before coiling to reduce mold and mildew.
If you're showering, be mindful of water pressure; the hose is designed for potable water but not for high-pressure applications. Always turn off the water at the source when the hose is not in use to avoid accidental leaks.
How to Store a Coil Hose Without Damage
Proper storage extends the life of your hose and keeps it ready for the next trip.
- Drain completely: After each use, disconnect the hose and let all water drain out. Hang it vertically to dry before storing.
- Coil loosely: Avoid tight coils that can kink the hose. Follow the natural coil pattern and secure with a strap or tie.
- Store in a cool, dry place: Keep the hose out of direct sunlight and away from sharp objects. A storage bag or bin works well.
- Avoid freezing: If temperatures drop below freezing, bring the hose indoors to prevent cracking.
Fixing Common Leaks on Your WaterPORT Hose
Leaks usually happen at connection points. Here's how to address them.
- Check the quick connect fittings: Ensure the adapters are fully seated and the O-rings are clean and intact. A small amount of silicone grease can help seal.
- Tighten connections: Hand-tighten any threaded parts. Over-tightening can damage the fittings.
- Inspect the hose for damage: Look for cuts or abrasions. If the hose itself is damaged, it may need replacement.
- Test under pressure: Run water through and observe. If a leak persists at the same spot, contact customer support for further assistance.
What the Supplied Information Doesn't Cover
The provided details do not include specific maintenance instructions, such as cleaning solutions or frequency. For care beyond basic rinsing and drying, refer to WaterPORT's official care guidelines or contact support. Always follow safe water practices when using the hose for drinking water.


