How to Use a WaterPORT Shut Off Valve for Camp Showers

By Klymit - Official Site | Lightweight Camping Gear | Published: 2026-10-20

Category: How-to Guides

Learn how to install and operate the WaterPORT Shut Off Valve for easy water flow control during camp showers. This guide covers setup, use, and common mistakes.

Quick answer

Attach the WaterPORT Shut Off Valve between your WaterPORT spout and shower hose to control water flow with a simple twist, reducing waste and making rinsing easier.

Why add a shut off valve to a camp shower?

Without a valve, water from a gravity-fed WaterPORT keeps flowing until you pinch the hose or lift the bag—both inconvenient and wasteful. The all-metal Shut Off Valve gives you a solid handle to stop and start the stream while keeping your hands free for soaping or rinsing.

Steps to install and use the valve for camp showers

Connect the valve to the WaterPORT spout: Screw the Shut Off Valve directly onto the threaded outlet of your WaterPORT tank or GoSpout. Hand-tighten only—over-tightening can damage the threads. Check that the valve is fully seated but not forced; a loose connection will drip.
Attach your shower hose to the valve outlet: Connect your standard camp shower hose to the opposite end of the valve. Ensure the hose is secure so it doesn't pop off when water pressure builds. Use a hose with a standard garden-hose thread; adapters may be needed for non-standard fittings.
Open the valve and test the flow: Turn the valve handle counterclockwise to open. Let water flow through the hose and shower head to clear any air. Then close the valve by turning clockwise until snug. If the valve feels stiff, apply a drop of silicone lubricant to the stem—never force it.
Use the valve during your shower: Open the valve to start water flow, then close it to pause while you soap up or shampoo. The metal handle stays cool to the touch even with hot water. Close the valve before you finish to conserve water; reopen it for a final rinse.
Disconnect and drain after use: Remove the valve from the WaterPORT and hose. Open it fully and shake out any remaining water. Store it dry to prevent mineral buildup. Leaving water in the valve during storage can cause corrosion over time, even with all-metal construction.

Product facts

Shut Off Valve: All-metal construction for long-lasting performance and easy open and close operation to manage water flow. The metal build holds up to repeated outdoor use, and the simple twist action lets you pause the shower without fumbling with the hose.
Shut Off Valve