Klymit - Official Site | Lightweight Camping Gear

How to Install a GoSpout on Your WaterPORT Tank

How to Install a GoSpout on Your WaterPORT Tank

By Klymit - Official Site | Lightweight Camping Gear | Published: 2026-10-23

Category: How-to Guides

Learn how to install a GoSpout on your WaterPORT tank for a pressurized camp water system. Step-by-step guide with common mistakes to avoid.

Quick Answer

Attach the GoSpout to your WaterPORT tank by threading it onto the tank outlet, then pressurize the system by pumping the tank or using the built-in pressure mechanism. Check for leaks before use.

Before You Start: What You Need

You'll need a WaterPORT tank (any size works) and the GoSpout assembly. The GoSpout includes a flexible hose, spray nozzle, and a threaded connector that fits the tank's outlet. No tools are required, but having a clean work surface helps avoid dirt in the system.

Common Installation Mistakes to Avoid

A loose connection is the most frequent issue. If the GoSpout isn't threaded fully, it may leak under pressure. Also, don't overtighten—hand-tight is sufficient. Another mistake is installing the GoSpout with the tank already full; always install it on an empty tank to prevent spills.

Installation Steps

  1. Prepare the Tank: Ensure your WaterPORT tank is empty and the outlet is clean. Remove any dust or debris from the threads to guarantee a good seal. A clean connection prevents leaks and contamination.
  2. Attach the GoSpout: Screw the GoSpout connector onto the tank's outlet by hand until snug. Do not use tools—overtightening can damage the threads. If it feels cross-threaded, back it off and start over.
  3. Pressurize the System: Pump the tank's built-in pressure mechanism (or use the included hand pump) until you feel resistance. Listen for hissing sounds that indicate a leak. A steady hiss means you need to tighten the connection or check the O-ring.
  4. Test the Spray: Open the GoSpout nozzle and check for a steady stream. If the spray is weak, add more pressure. If water drips from the connection, re-tighten the GoSpout. Always test over a bucket or ground to avoid wasting water.

Product That Makes It Easy

  • GoSpout - 2 Gallon: The GoSpout Tank is a portable, pressurized water solution for outdoor adventures, delivering high-pressure spray for rinsing gear or washing up. It turns your WaterPORT tank into a convenient camp faucet, so you don't need gravity or a separate pump for clean water access.
    GoSpout - 2 Gallon
    GoSpout - 2 Gallon

Shop Related Products

GoSpout - 2 Gallon

GoSpout - 2 Gallon

$105.84 $144.99

Shop Now