Bed Rack Mount Kit: Mounting a WaterPORT on Bed Rails
By Klymit - Official Site | Lightweight Camping Gear | Published: 2026-10-31
Category: How-to Guides
Learn how to mount a WaterPORT tank on your truck bed rack using the Bed Rack Mount Kit. Follow these steps for a secure, rattle-free setup.
Quick answer
Use the Bed Rack Mount Kit to hang your WaterPORT 8 Gallon Weekender Tank under any bed rack, adjusting the height to high or low. The process involves positioning the mount, securing it to the rack, and hanging the tank, with careful attention to clearance and tightness.
Why mounting under the rack makes sense
Bed racks often carry tents or gear that consume valuable space. Hanging the WaterPORT tank underneath frees up the top deck for other equipment. The Bed Rack Mount Kit is designed for this purpose, offering a universal fit for most bed racks and the flexibility to choose a high or low mounting position.
Before you start, confirm that your bed rack has compatible rails or crossbars. The kit is universal, but you should check that the mounting points align with your rack's structure. Also, consider the weight of a full tank (8 gallons of water weighs about 67 pounds) and ensure your rack is rated for that load.
Tools and preparation
Gather the Bed Rack Mount Kit, the WaterPORT 8 Gallon Weekender Tank, and basic hand tools. You may need a wrench or socket set for the bolts, and a helper to lift the tank into place. Clear the area under the bed rack and check for any obstructions like wiring or brake lines.
Decide whether you want the tank mounted high (closer to the rack) or low (further down). High mounting keeps the tank more protected but may reduce ground clearance; low mounting makes filling and draining easier but exposes the tank more. Choose based on your typical driving conditions and access needs.
Step-by-step installation
- Position the mount on the bed rack: With the tank empty, hold the mount against the bed rack rails where you want the tank to hang. For high mounting, place it close to the top crossbar; for low mounting, lower it for easier access. Check that the mount's holes align with the rack's slots or holes. Ensure the mount is centered and level before proceeding.
- Secure the mount to the rack: Use the provided bolts and hardware to attach the mount to the bed rack. Tighten the bolts evenly in a crisscross pattern to avoid warping. Most mistakes happen here: over-tightening can strip threads, while under-tightening leads to rattles. Use a torque wrench if available, and follow any provided specifications. Check that the mount is firmly attached and does not wobble.
- Hang the WaterPORT tank on the mount: Lift the empty tank (or with a helper) and hook it onto the mount according to the kit's design. Ensure the tank is seated properly and the mounting points engage fully. Some kits use brackets or straps; follow the specific instructions for your kit. Verify the tank is secure and cannot slide or tip.
- Connect and test: Fill the tank with water and check for stability. Drive slowly over bumps to test for movement. If you notice shifting or noise, re-tighten the mount and check the tank's attachment points. A secure mount should show no movement during normal driving.
Product facts
- Bed Rack Mount Kit: The Bed Rack Mount Kit is a universal mount that attaches the 8 Gallon Weekender Tank to any bed rack, with adjustable height (high or low). This means you can fit the tank under your rack regardless of brand, and choose a position that balances protection and accessibility.
Bed Rack Mount Kit
